Page History
...
Scroll Ignore | ||||||
---|---|---|---|---|---|---|
|
Scroll Ignore | ||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overview
The following diagram shows an overview of all connectors and LEDs.
Figure: Overview of Connections and status LEDs |
Motor Connections
Anchor | ||||
---|---|---|---|---|
|
...
GREEN | State | Resolution |
---|---|---|
Solid | No Error | N/A |
Blinking | No IP Address given |
|
YELLOW | State | Resolution |
Solid | Motor in disabled state (no torque) | Enable motor |
RED | State | Resolution |
Solid | 24V motor drive power not present | Apply 24V drive power |
Blinking | Module error | Unrecoverable - cycle power |
Flashing | 1 - Position error | Clear error/fault |
Scroll Ignore | ||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IP Address Selector
The IP address selector switches will only be active if not using DHCP. If a static IP is programmed with the final value as 0, the rotary selectors will choose the final octet of the IP address. For example:
|
Overview
Content Tools