Versions Compared

Old Version 34

changes.mady.by.user Mark McCann

Saved on

compared with

New Version 35

changes.mady.by.user Mark McCann

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The system status LED provides feedback to the user on overall system status. The following states exist

If using DHCP, this could mean that either

  • the motor was assigned an IP address, or
    • that no IP address was assigned so that the
    motor defaulted to 169.254.x.x. Each x is random between 0..255.
    The     Subnet Mask 255.255.0.0.
    GREENStateResolution
    SolidNo ErrorN/A
    BlinkingNo IP Address given
    • Investigate why no DHCP server found
    • Program a static IP
    YELLOWStateResolution
    SolidMotor in disabled state (no torque)Enable motor
    REDStateResolution
    Solid

    24V motor drive power not present 

    		Apply 24V drive power
    BlinkingModule errorUnrecoverable - cycle power
    Flashing

    1 - Position error
    2 - Over speed error
    3 - Over temperature error
    4 - Over torque error

    		Clear error/fault
    LED ColourDescription
    Yellow

    Blinking:

    Motor is searching for network 

    Green

    Solid:

    Motor has an IP address. 

    Note


    IP Address Selector 
    Anchor
    IPSelect
    IPSelect

    ...