...
| Scroll Ignore |
|---|
The following diagram shows an overview of all connectors and LEDs.
| draw.io Diagram |
|---|
| border | false |
|---|
| viewerToolbar | true |
|---|
| fitWindow | false |
|---|
| diagramName | CM1-T Diagram |
|---|
| simpleViewer | true |
|---|
| width | 600 |
|---|
| links | auto |
|---|
| tbstyle | top |
|---|
| lbox | true |
|---|
| diagramWidth | 1343 |
|---|
| revision | 1 |
|---|
|
Figure: Overview of Connections and status LEDs |
...
| draw.io Diagram |
|---|
| border | false |
|---|
| viewerToolbar | true |
|---|
| fitWindow | false |
|---|
| diagramName | CM1-T Connectors |
|---|
| simpleViewer | true |
|---|
| width | 400 |
|---|
| links | auto |
|---|
| tbstyle | top |
|---|
| lbox | true |
|---|
| diagramWidth | 961 | revision | 1 |
|---|
|
Ethernet Connectors
The Ethernet ports use standard Ethernet RJ45 CAT5e, M8-A or M8-D connectors depending on the motor variant. They are labeled IN and OUT but either port may be used. The CM1-T Ethernet connections will act as a TCP/IP switch. Multiple motors or other devices can be connected in a daisy chain configuration without the need to run back to a central switch for each ethernet device.
...
Link and Activity LEDs
| Section |
|---|
| Column |
|---|
| RJ45 | | draw.io Diagram |
|---|
| border | true |
|---|
| viewerToolbar | true |
|---|
| fitWindow | false |
|---|
| diagramName | LinkAct |
|---|
| simpleViewer | true |
|---|
| width | 600 |
|---|
| links | auto |
|---|
| tbstyle | top |
|---|
| lbox | true |
|---|
| diagramWidth | 1422 |
|---|
| revision | 1 |
|---|
|
M8-A and M8-DThe Link LED will be lit as long as there is a network connection. The activity LED will blink when there is data transfer to/from the motor.
|
|
System and Motor Status LED
| Anchor |
|---|
| System and Motor Status LED |
|---|
| System and Motor Status LED |
|---|
|
...
| Scroll Ignore |
|---|
The IP address selector switches will only be active if not using DHCP. If a static IP is programmed with the final value as 0, the rotary selectors will choose the final octet of the IP address. For example: | Static IP | x10 Value | x1 Value | IP Address used |
|---|
| 192.168.1.10 | 2 | 3 | 192.168.1.10 | | 192.168.1.10 | 0 | 0 | 192.168.1.10 | | 192.168.1.0 | 2 | 3 | 192.168.1.35 | | 192.168.1.0 | A | 5 | 192.168.1.165 | | 192.168.1.0 | E | 3 | 192.168.1.227 |
| draw.io Diagram |
|---|
| border | false |
|---|
| viewerToolbar | true |
|---|
| fitWindow | false |
|---|
| diagramName | IPSelect |
|---|
| simpleViewer | true |
|---|
| width | 400 |
|---|
| links | auto |
|---|
| tbstyle | top |
|---|
| lbox | true |
|---|
| diagramWidth | 828 | revision | 1 |
|---|
|
|