Versions Compared

Old Version 2

changes.mady.by.user Andrew Thompson

Saved on

compared with

New Version Current

changes.mady.by.user Mark McCann

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Scroll Ignore


Section


Column

Tables of Contents

Table of Contents


Column

Scroll Export Button
template-id7e5fdc7c-3303-4376-894b-325dffacee51
add-onScroll PDF Exporter



Setup Information

The following list indicates important setup information for running in Modbus TCP. Ensure that the master is setup with the same configuration.

  • Port 502 - Modbus-TCP uses port 502. This is fixed.
  • Holding register addressing depends on the system used. Refer to your modbus master documentation to understand the address format.
    • Additional information is below to list the most common address types
  • Max holding registers for read and write is 16
  • Use function code 0x10 for write single register. Function code 0x06 is not supported.
  • All registers are 32-bit
    • Exceptions are the registers used used directly in the CM1-T Library (IEC 61131-3).
  • 32-bit word mapping is little endian

Holding Register List

...


Included below is a table which details the location and function of the CM1 Modbus registers.
The addresses included below are referenced to the Modbus data model (PLC address for read/write to holding registers)

Note: Even if Direct Control is not used the Direct Control feedback registers can be useful for reading back motor information.

Click on a link below to jump to the associated registers

  1. Motor Information
  2. CM1-T Available Registers
  3. CM1-T Available Registers
  4. CM1-T Available Registers
  5. CM1-T Available Registers
  6. CM1-T Available Registers
  7. CM1-T Available Registers
  8. CM1-T Available Registers
  9. CM1-T Available Registers
  10. CM1-T Available Registers
  11. CM1-T Available Registers
  12. CM1-T Available Registers
  13. CM1-T Available Registers
  14. CM1-T Available Registers

...

Table of Contents
maxLevel3
minLevel3


Motor Information

Holding Register

...

Holding Register

Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

0

40001

Position Error (?95)

Yes

No

40003

2

40003

Motor Position (?96)

Yes

No

4

40005

40005

Motor Speed (?97)

Yes

No

6

40007

40007

Motor Torque (?98)

Yes

No

8

40009

40009

Motor Status (?99)

Yes

No

AnchorVariablesVariables40011

Variables

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

10

40011

V0

Yes

Yes

40013

12

40013

V1

Yes

Yes

40015

14

40015

V2

Yes

Yes

40017

16

40017

V3

Yes

Yes

40019

18

40019

V4

Yes

Yes

40021

20

40021

V5

Yes

Yes

40023

22

40023

V6

Yes

Yes

24

40025

40025

V7

Yes

Yes

26

40027

40027

V8

Yes

Yes

28

40029

40029

V9

Yes

Yes

30

40031

40031

V10

Yes

Yes

40033

32

40033

V11

Yes

Yes

34

40035

40035

V12

Yes

Yes

40037

36

40037

V13

Yes

Yes

40039

38

40039

V14

Yes

Yes

40

40041

40041

V15

Yes

Yes

anchor

Direct Registers

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

42

40043

Direct Registers40043

P0

Yes

Yes

40045

44

40045

S0

Yes

Yes

46

40047

40047

A0

Yes

Yes

40049

48

40049

V0

Yes

Yes

40051

50

40051

R0

Yes

Yes

40053

52

40053

M0

Yes

Yes

AnchorIOIO40055

Inputs/Outputs

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

54

40055

Analog Output

Yes

Yes

40057

56

40057

Input Status (?70)

Yes

No

40059

58

40059

Output Status (?50)

Yes

Yes

Positions

AnchorCML PortCML Port

40103

CML Port [ASCII]

No

Yes

AnchorPositionsPositions

40201

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

200

40201

P0

Yes

Yes

202

40203

40203

P1

Yes

Yes

40205

204

40205

P2

Yes

Yes

206

40207

40207

P3

Yes

Yes

40209

208

40209

P4

Yes

Yes

40211

210

40211

P5

Yes

Yes

212

40213

40213

P6

Yes

Yes

214

40215

40215

P7

Yes

Yes

216

40217

40217

P8

Yes

Yes

218

40219

40219

P9

Yes

Yes

40221

220

40221

P10

Yes

Yes

222
40223

40223

P11

Yes

Yes

40225
224

40225

P12

Yes

Yes

40227
226

40227

P13

Yes

Yes

40229
228

40229

P14

Yes

Yes

40231
230

40231

P15

Yes

Yes

40233
232

40233

P16

Yes

Yes

40235
234

40235

P17

Yes

Yes

40237
236

40237

P18

Yes

Yes

40239
238

40239

P19

Yes

Yes

40241
240

40241

P20

Yes

Yes

242
40243

40243

P21

Yes

Yes

40245
244

40245

P22

Yes

Yes

40247
246

40247

P23

Yes

Yes

40249
248

40249

P24

Yes

Yes

40251
250

40251

P25

Yes

Yes

Anchor

R Registers

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

300

40301

R Registers40301

R0

Yes

Yes

302
40303

40303

R1

Yes

Yes

304
40305

40305

R2

Yes

Yes

40307
306

40307

R3

Yes

Yes

308
40309

40309

R4

Yes

Yes

40311
310

40311

R5

Yes

Yes

40313
312

40313

R6

Yes

Yes

40315
314

40315

R7

Yes

Yes

40317
316

40317

P8

Yes

Yes

40319
318

40319

P9

Yes

Yes

40321
320

40321

R10

Yes

Yes

40323
322

40323

R11

Yes

Yes

40325
324

40325

R12

Yes

Yes

40327
326

40327

R13

Yes

Yes

328
40329

40329

R14

Yes

Yes

40331
330

40331

R15

Yes

Yes

40333
332

40333

R16

Yes

Yes

40335
334

40335

R17

Yes

Yes

40337
336

40337

R18

Yes

Yes

40339
338

40339

R19

Yes

Yes

40341
340

40341

R20

Yes

Yes

40343
342

40343

R21

Yes

Yes

344
40345

40345

R22

Yes

Yes

346
40347

40347

R23

Yes

Yes

348
40349

40349

R24

Yes

Yes

350
40351

40351

R25

Yes

Yes

Anchor

N Registers

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

400

40401

N Registers40401

N0

Yes

Yes

40403
402

40403

N1

Yes

Yes

40405
404

40405

N2

Yes

Yes

40407
406

40407

N3

Yes

Yes

40409
408

40409

N4

Yes

Yes

40411
410

40411

N5

Yes

Yes

40413
412

40413

N6

Yes

Yes

414
40415

40415

N7

Yes

Yes

40417
416

40417

N8

Yes

Yes

40419
418

40419

N9

Yes

Yes

40421
420

40421

N10

Yes

Yes

40423
422

40423

N11

Yes

Yes

40425
424

40425

N12

Yes

Yes

40427
426

40427

N13

Yes

Yes

40429
428

40429

N14

Yes

Yes

430
40431

40431

N15

Yes

Yes

432
40433

40433

N16

Yes

Yes

434
40435

40435

N17

Yes

Yes

436
40437

40437

N18

Yes

Yes

40439
438

40439

N19

Yes

Yes

440
40441

40441

N20

Yes

Yes

40443
442

40443

N21

Yes

Yes

40445
444

40445

N22

Yes

Yes

446
40447

40447

N23

Yes

Yes

448
40449

40449

N24

Yes

Yes

450
40451

40451

N25

Yes

Yes

AnchorSpeedsSpeeds40603

Speeds

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

602

40603

S0

Yes

Yes

40605
604

40605

S1

Yes

Yes

40607
606

40607

S2

Yes

Yes

40609
608

40609

S3

Yes

Yes

40611
610

40611

S4

Yes

Yes

40613
612

40613

S5

Yes

Yes

40615
614

40615

S6

Yes

Yes

40617
616

40617

S7

Yes

Yes

618
40619

40619

S8

Yes

Yes

40621
620

40621

S9

Yes

Yes

40623
622

40623

S10

Yes

Yes

40625
624

40625

S11

Yes

Yes

40627
626

40627

S12

Yes

Yes

40629
628

40629

S13

Yes

Yes

40631
630

40631

S14

Yes

Yes

40633
632

40633

S15

Yes

Yes

AnchorAccelerationsAccelerations40635

Accelerations

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

634

40635

A0

Yes

Yes

636
40637

40637

A1

Yes

Yes

40639
638

40639

A2

Yes

Yes

40641
640

40641

A3

Yes

Yes

642
40643

40643

A4

Yes

Yes

644
40645

40645

A5

Yes

Yes

646
40647

40647

A6

Yes

Yes

648
40649

40649

A7

Yes

Yes

40651
650

40651

A8

Yes

Yes

AnchorTorqueTorque40653

Torques

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

652

40653

M0

Yes

Yes

40655
654

40655

M1

Yes

Yes

40657
656

40657

M2

Yes

Yes

40659
658

40659

M3

Yes

Yes

40661
660

40661

M4

Yes

Yes

40663
662

40663

M5

Yes

Yes

664
40665

40665

M6

Yes

Yes

666
40667

40667

M7

Yes

Yes

668
40669

40669

M8

Yes

Yes

anchor

K Parameters

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

670

40671

RESERVED

Yes

No

672

40673

K Parameters

40671

K0

Yes

Yes

40673

K1

Yes

No

Yes
674
40675

40675

K2

Yes

Yes

40677

No

676

40677

K3

Yes

No

Yes
678
40679

40679

K4

Yes

Yes

40681

No

680

40681

K5

Yes

Yes

40683

No

682

40683

K6

Yes

No

Yes
684
40685

40685

K7

Yes

Yes

40687

No

686

40687

K8

Yes

Yes

40689

No

688

40689

K9

Yes

Yes

40691

No

690

40691

K10

Yes

Yes

40693

No

692

40693

K11

Yes

Yes

40695

No

694

40695

K12

Yes

No

Yes
696
40697

40697

K13

Yes

No

Yes
698
40699

40699

K14

Yes

Yes

40701

No

700

40701

K15

Yes

Yes

40703

No

702

40703

K16

Yes

No

Yes
704
40705

40705

K17

Yes

No

Yes
706
40707

40707

K18

Yes

Yes

40709

No

708

40709

K19

Yes

Yes

40711

No

710

40711

K20

Yes

Yes

712
40713

40713

K21

Yes

Yes

40715
714

40715

K22

Yes

Yes

40717
716

40717

K23

Yes

Yes

40719
718

40719

K24

Yes

Yes

40721
720

40721

K25

Yes

Yes

40723
722

40723

K26

Yes

Yes

40725
724

40725

K27

Yes

Yes

40727
726

40727

K28

Yes

Yes

40729
728

40729

K29

Yes

Yes

40731
730

40731

K30

Yes

Yes

732
40733

40733

K31

Yes

Yes

40735
734

40735

K32

Yes

Yes

40737
736

40737

K33

Yes

Yes

40739
738

40739

K34

Yes

Yes

40741
740

40741

K35

Yes

Yes

40743
742

40743

K36

Yes

Yes

40745
744

40745

K37

Yes

Yes

40747
746

40747

K38

Yes

Yes

748
40749

40749

K39

Yes

Yes

750
40751

40751

K40

Yes

Yes

752
40753

40753

K41

Yes

Yes

754
40755

40755

K42

Yes

Yes

40757
756

40757

K43

Yes

Yes

758
40759

40759

K44

Yes

Yes

40761
760

40761

K45

Yes

Yes

40763
762

40763

K46

Yes

Yes

764
40765

40765

K47

Yes

Yes

766
40767

40767

K48

Yes

Yes

768
40769

40769

K49

Yes

Yes

770
40771

40771

K50

Yes

Yes

40773
772

40773

K51

Yes

Yes

774
40775

40775

K52

Yes

Yes

40777
776

40777

K53

Yes

Yes

40779
778

40779

K54

Yes

Yes

40781
780

40781

K55

Yes

Yes

782
40783

40783

K56

Yes

Yes

784
40785

40785

K57

Yes

Yes

786
40787

40787

K58

Yes

Yes

40789
788

40789

K59

Yes

Yes

790
40791

40791

K60

Yes

Yes

40793
792

40793

K61

Yes

Yes

40795
794

40795

K62

Yes

Yes

40797
796

40797

K63

Yes

Yes

40799
798

40799

K64

Yes

Yes

40801
800

40801

K65

Yes

Yes

40803
802

40803

K66

Yes

Yes

40805
804

40805

K67

Yes

Yes

40807
806

40807

K68

Yes

Yes

40809
808

40809

K69

Yes

Yes

810
40811

40811

K70

Yes

Yes

40813
812

40813

K71

Yes

Yes

40815
814

40815

K72

Yes

Yes

40817
816

40817

K73

Yes

Yes

40819
818

40819

K74

Yes

Yes

40821
820

40821

K75

Yes

Yes

40823
822

40823

K76

Yes

Yes

40825
824

40825

K77

Yes

Yes

826
40827

40827

K78

Yes

Yes

828
40829

40829

K79

Yes

Yes

830
40831

40831

K80

Yes

Yes

832
40833

40833

K81

Yes

Yes

40835
834

40835

K82

Yes

Yes

836
40837

40837

K83

Yes

Yes

40839
838

40839

K84

Yes

Yes

40841
840

40841

K85

Yes

Yes

842
40843

40843

K86

Yes

Yes

844
40845

40845

K87

Yes

Yes

846
40847

40847

K88

Yes

Yes

848
40849

40849

K89

Yes

Yes

40875






874

40875

RESERVED

Yes

No

Yes

Anchor

H Gain Parameters

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

900

40901

H Gain Parameters40901

H0

Yes

Yes

902
40903

40903

H1

Yes

Yes

40905
904

40905

H2

Yes

Yes

906
40907

40907

H3

Yes

Yes

40909
908

40909

H4

Yes

Yes

40911
910

40911

H5

Yes

Yes

40913
912

40913

H6

Yes

Yes

40915
914

40915

H7

Yes

Yes

AnchorTimersTimers40951

Timers

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

950

40951

T0

Yes

No

952
40953

40953

T1

Yes

Yes

954
40955

40955

T2

Yes

Yes

956
40957

40957

T3

Yes

Yes

958
40959

40959

T4

Yes

Yes

40961
960

40961

T5

Yes

Yes

962
40963

40963

T6

Yes

Yes

40965
964

40965

T7

Yes

Yes

96640967T8YesYes

Direct Control Registers

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

100041001CPUTimeYesNo
100241003ActualPositionYesNo
100441005ActualTargetPositionYesNo
100641007MotorStatusYesNo
100841009ActualRatedCurrentYesNo
101041011ActualOverloadTorqueYesNo
101241013AnalogInYesNo
101441015DigitalInYesNo
101641017TemperatureYesNo
101841019DCVoltageYesNo
102041021N/AYesNo
102241023ModeOfOperationDisplayYesNo
102441025N/AYesNo
102641027ActualSpeedYesNo
102841029TargetPositionYesYes
103041031TargetSpeedYesYes
103241033TargetTorqueYesYes
103441035TargetAccelerationYesYes
103641037TargetDecelerationYesYes
103841039ControlwordYesYes
104041041ModeOfOperationYesYes
104241043DigitalOutYesYes

CM1-T Library Mapped Registers

The set of registers below are typically used when mapping the Modbus read and write messages directly to a data structure.

  • This is often achieved using function code 0x23 (read/write in single message)
  • The data structure should break the DINT register into the respective variables.
  • The CM1-T Library has been developed to be used with IEC 61131-3 IDEs such as Codesys, Machine Expert and TwinCAT. See Examples and Demos.

Holding Register Address

Motor Parameter


Read Access


Write Access


Base Address

Modicon Address

Read Registers
110041101us50Counter (DINT)YesNo
110241103ActualPosition (DINT)YesNo
110441105MotionTarget (DINT)YesNo
110641107ActualVelocity (DINT)YesNo
110841109

MotorStatus (INT)

PercentActualCurrent (INT)

YesNo
111041111

PercentOverloadTorque (INT)

AnalogIN (INT)

YesNo
111241113

DCVoltage (INT)

DigitalIO (SINT)

Temperature (SINT)

YesNo
111441115

ModeOfOperationDisplay (SINT)

ErrorCode (SINT)

ReadAddress1 (INT)

YesNo
111641117ReadValue1 (DINT)YesNo
Write Registers
120041201TargetPosition (DINT)YesYes
120241203TargetVelocity (DINT)YesYes
120441205

TargetTorque (INT)

TargetAcceleration (INT)

YesYes
120641207

TargetDeceleration (INT)

ControlWord (INT)

YesYes
120841209

ModeOfOperation (SINT)

DigitalOUT (SINT)

WriteAddress1 (INT)

YesYes
121041211WriteValue1 (DINT)YesYes
121241213

ReadAddress1 (INT)

PAD (INT)

YesYes