Page History

...

1. Contours - download
   • Contours is used to setup homing parameters for each axis.
   • Support for Contours is through Myostat Motion Control^©
     • Support portal
     • support@myostat.ca
2. Weigl Hardware Configurator - download
   • Configurator is used to setup the ProCommander 3 with the Cool Muscle
   • The Weigl Hardware Configurator must be version 1.23 or higher.
   • Support for the Hardware Configurator is through Weigl^©
     • http://faq.weigl.support/support/home

...

The system network must be configured as shown in figure 1. The computer, Cool Muscles and the ProCommander 3 all need to be setup with the same IP range and subnet mask. The following defaults are set

...