Page History
...
If the drive and control power are separated all motors will draw a maximum of 125mA on the 24V control power.
Master Controllers
| Anchor | ||||
|---|---|---|---|---|
|
EtherCAT is an industrial protocol that requires a master controller to control all slave devices. Master controllers typically have the ability to configure the slave device as well as control them. The following is an example list of common EtherCAT controllers
Note: Control Room is not an EtherCAT master and cannot be used with the CM1-E.
...
(1) EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.Anchor ethercattm ethercattm
...
Overview
Content Tools